A Surface Filter Module Rainwater Harvesting System is designed to handle rainwater collected from open areas, paved surfaces, parking spaces, roads, courtyards, and industrial premises.
Surface runoff can carry higher quantities of mud, sand, oil traces, leaves, and floating debris, so proper filtration is important before recharge or reuse.
Our surface filter modules are planned to manage high flow volumes while protecting recharge wells, recharge pits, and connected drainage systems from heavy silt load.
Surface rainwater is collected from paved or open areas through channels, drains, or inlet lines.
Heavier mud, sand, and settled particles are separated before fine filtration.
Water passes through the surface filter module to reduce suspended impurities.
Filtered water is directed toward recharge wells, pits, or other planned discharge points.
It is a filtration unit used to clean rainwater collected from ground surfaces before it reaches a recharge or storage system.
Yes, surface runoff usually carries more silt and heavier impurities, so the filtration approach is planned differently.
It can be installed in factories, parking areas, commercial complexes, farms, societies, and large open premises.
Yes, the module size and inlet arrangement are selected according to expected runoff volume.
Yes, periodic removal of settled silt and debris is recommended for efficient performance.